Sharp.Augeas/CodeLiturgy.Augeas/root/etc/multipath.conf

98 lines
2.6 KiB
Plaintext

# This is a basic configuration file with some examples, for device mapper
# multipath.
# For a complete list of the default configuration values, see
# /usr/share/doc/device-mapper-multipath-0.4.8/multipath.conf.defaults
# For a list of configuration options with descriptions, see
# /usr/share/doc/device-mapper-multipath-0.4.8/multipath.conf.annotated
# Blacklist all devices by default. Remove this to enable multipathing
# on the default devices.
blacklist {
devnode "*"
}
# By default, devices with vendor = "IBM" and product = "S/390.*" are
# blacklisted. To enable mulitpathing on these devies, uncomment the
# following lines.
blacklist_exceptions {
device {
vendor "IBM"
product "S/390.*"
}
}
## Use user friendly names, instead of using WWIDs as names.
defaults {
user_friendly_names yes
}
#
# Here is an example of how to configure some standard options.
#
defaults {
udev_dir /dev
polling_interval 10
selector "round-robin 0"
path_grouping_policy multibus
getuid_callout "/sbin/scsi_id --whitelisted /dev/%n"
prio alua
path_checker readsector0
rr_min_io 100
max_fds 8192
rr_weight priorities
failback immediate
no_path_retry fail
user_friendly_names yes
}
#
# The wwid line in the following blacklist section is shown as an example
# of how to blacklist devices by wwid. The 2 devnode lines are the
# compiled in default blacklist. If you want to blacklist entire types
# of devices, such as all scsi devices, you should use a devnode line.
# However, if you want to blacklist specific devices, you should use
# a wwid line. Since there is no guarantee that a specific device will
# not change names on reboot (from /dev/sda to /dev/sdb for example)
# devnode lines are not recommended for blacklisting specific devices.
#
blacklist {
wwid 26353900f02796769
devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
devnode "^hd[a-z]"
}
multipaths {
multipath {
wwid 3600508b4000156d700012000000b0000
alias yellow
path_grouping_policy multibus
path_checker readsector0
path_selector "round-robin 0"
failback manual
rr_weight priorities
no_path_retry 5
}
multipath {
wwid 1DEC_____321816758474
alias red
}
}
devices {
device {
vendor "COMPAQ "
product "HSV110 (C)COMPAQ"
path_grouping_policy multibus
getuid_callout "/sbin/scsi_id --whitelisted /dev/%n"
path_checker readsector0
path_selector "round-robin 0"
hardware_handler "0"
failback 15
rr_weight priorities
no_path_retry queue
}
device {
vendor "COMPAQ "
product "MSA1000 "
path_grouping_policy multibus
}
}